Digital Readouts:
TI 500 BW With Cattle Motion
110Volt or 6 C size batteries.....................$349.00USD
Auto Power Off
Period
Selects the auto off time period in minutes:
"Off" = Disabled (Always On)
Hold Mode
Enable
Activates the "Hold: mode where weight of the object on the
platform is frozen on the display until the applied weight is
decreased to one half of the memorized weight. This is used in
conjunction with the Motion Band setting to capture an unstable
load, such as livestock
Motion Band
Sets the level at which motion is detected by comparing the present
display update with the previous one. If motion is not detected
for two seconds or more, scale is in standstill and can process
a Print or Zero command. Maximum value varies depending on local
regulations
Digital Filter
Averages weight readings to produce higher stability. The higher
the filter setting, the greater the stability but the slower the
indicator’s response time.
ANALOG SPECIFICATIONS
Internal Resolution Approximately
130,000 counts
Excitation Voltage +5VDC,
4 x350W load cells
POWER
Alkaline Batteries 6 –
"C" Size Cells
Rechargeable Battery 6 VDC,
3.0 Ah lead acid
AC Adapter – Alkaline
Batteries 12 VDC, 500mA Female
AC Adapter – Rechargeable
Battery 12 VDC, 800mA Female
Power Consumption _ TI-500BW
80mA + 30mA per 350W Loadcell
MECHANICAL
Overall Dimensions –
Plastic 8.1" x 11.8" x 3.9" (205mm x 300mm x 100mm)
TI
1000 Same as above in stainless..........$449.00USD
.gif){kind=small}
Determine maximum total weight that you will be weighting, including
weight of chute
